Vanq ha creato il Progetto CFL or fluorescent growth lamp and establishing an optimal growth operation il 3/8/2020
Descrizione
Hi, I showed you how to install these two shelves last week. I use this shelf to grow in the greenhouse all winter. The top frame uses south-facing windows. The basic framework will rely on these growing lights and lights to complete all the work, from very expensive high-tech products and technologies to simpler things (such as shopping lights), which are more costly in this week’s plan benefit. I will show you how to choose these grow lights and how to install them in our system. Usually, I use the system for planting seedlings in summer, because this fluorescent lamp or CFL bulb is sufficient because I can grow peppers and cherries indoors under natural light like tomatoes and avoid natural light. In the case of using direct light, between six to eight hours in direct sunlight, even the best direct light will not be stronger than the sun, and you want to run, so I will choose fluorescent lights for 12 to 18 hours a day, Therefore, I choose fluorescent lamps, so the selection criteria apply to compact fluorescent lamps and fluorescent lamps.
They are almost the same, but in different configurations, Class T is a measure of bulb diameter. Generally speaking, the lower the T number of the one-eighth bulb, the more suitable for plant growth, and the lower the T grade of the bulb, the more likely it is to be effective. Convert energy to photosynthesis, in this case, I will choose t8 bulb instead of t12let to convert to lumens. It describes the amount of visible light reaching a square meter area. This is because the blue and red spectrum commonly used by plants cannot be represented well in visible light. This device is not as useful as other devices when buying a girl’s wattage, which is obviously the power consumed by the bulb when it is selected and converted into light. The rule of thumb is that the higher the wattage, the better the plants will grow. The Kelvin level or color temperature is very important for growing plants. The sun emits a broad spectrum of light. , But the role of fluorescent lamps is very limited, and photosynthesis usually only occurs at one or two wavelengths, and photosynthesis is the most effective use of two wavelengths to grow 6,512 Kelvin (Kelvin) statement. Plants cannot use other wavelengths because the 6500 and 2100 wavelengths are converted to sugar at a much higher rate than other wavelengths. Fortunately, most fluorescent tubes do not have a Kelvin rating on their packaging, but if you choose a lamp, they will usually have a color temperature.
It is marked as a warm glow, usually around 2100 Kelvin, while cool white is usually around 6500. I changed the bulb to between 6500 and 2100 this year. I bought two bulbs of about 6,500 and two bulbs grown in the Phillips factory. It is said that they can shorten the wavelength of light by nearly 215 and 650. After choosing the bulb, it’s time to choose a ballast or ballast. I usually look for ballasts that have reflectors and are rated for t8 bulbs. Fluorescent lamps emit light equally in all directions. The reason I like to use these reflectors is because the light emitted initially leaves the plant and then reflects back to the plant. Similarly, if there is a wall behind you, it is white, it will reflect light more effectively, and then a mirror can improve the efficiency of photosynthesis overall by installing at least a little. The light of the miniature shelf is very simple. I chose some screw mounts so that I can pass through them to support the light, and can easily increase and decrease the brightness of the lamp, because these mounts must bear a certain amount of weight to ensure they can be placed, which is very important. Relying on the bracket, and at the same width and position, I pre-drilled some places to install them on the depth of the shelf surface. The screws still need considerable weight to support the weight of the bulb.
I have installed four of them to help balance the entire shelf. In Canada, I bought four best led grow lights for cannabis for this special project for 29 US dollars and 41 US cents, while in Canada, the price of the bulb is 69 US dollars and 98 US cents. The total monetary cost of the project is US$9,939, while the cost of using the same system in the United States is approximately US$89,85. I quoted in U.S. dollars last week. I estimate that this dual-shelf system will produce plants worth between US$96 and US$160. The cost of adding a shelf is 8454. The total cost of this special project is 183 93, and the amount to be repaid in the two growing seasons is just over one. Because if you want to learn more about the evolving lighting technology, or want to learn more about the technology, then this setting will help me grow in the coming winter.
Categoria principale
Agricoltura e forestazione
Categorie secondarie
Agricoltura e forestazione
Localizzazione del progetto
Website
https://www.vanqled.com/applications/cannabis-cultivation/
Spiacente.Non ci sono commenti per questo progetto